JVC 0802MWMMDWJEM - Manual (Page 70)

– 67 –
CD/MD Messages
For CD:
For MD:
Message
CANNOT PLAY
CD NO DISC
CANNOT REC
x1 REC ONLY
Message
BLANK DISC
CANNOT ENTRY!
CANNOT FORM!
CANNOT GROUP!
CANNOT JOIN
CANNOT LISTEN
CANNOT TITLE
CANNOT REC
x1 or x2 ONLY
READ ERROR
DISC FULL
DISC
PROTECTED
Signification
You are trying to play back a CD which
cannot be played or there is a problem
with the CD.
• No disc is on the disc tray.
• You are trying to play back a
CD-R/RW which has not been
“finalized.”
You are trying to record a CD onto a
MD and a tape at the same time using
x2 or x4 speed recording.
Signification
The disc is blank.
The track has already been in the
selected group.
You are trying to form a new group
including other groups.
There is no more space for storing
information concerning MD group.
You are trying to join tracks (shorter
than 8 seconds) or groups which cannot
be joined.
You are trying to listen to the sound
during high-speed recording.
You are trying to enter the title on the
MD which already has over 1 792
characters in total.
You are trying to record a CD in
program play or random play mode
using x4 speed recording.
The UTOC fails to be read.
There is no more space on the MD or
there are over 254 tracks.
MD is write-protected.
Solution
Change the CD.
• Place a disc on the disc tray.
• This is not a malfunction. You can
play back “finalized” CD-R/RWs.
This is not a malfunction. Select normal
recording speed (x1). (See page 40.)
Solution
Change the MD if you want to enjoy
playback.
This is not a malfunction.
(See “Adding a Track to a Group—
ENTRY GR” on page 45.)
This is not a malfunction.
(See “Forming a Group—FORM GR”
on page 44.)
You cannot form a group any more on
the MD.
This is not a malfunction.
(See pages 47, 53 and 66.)
This is not a malfunction.
You cannot listen to the sound during
high-speed recording.
This is not a malfunction.
(See “Assigning Titles to an MD” on
page 56.)
This is not a malfunction. Select other
recording speeds. (See page 36.)
Turn off the unit, then turn on it again.
Use another recordable MD or erase
some tracks.
Unprotect the MD or use another.
(See page 34.)
EN64-70UX-Z7MD[A]f 02.7.31, 21:30 67