JVC HD Everio SHARE STATION CU-VD40U - Manual (Page 12)

12
Saving PC Images to DVD
This burner can be used as a DVD burner by connecting it to a PC. Images edited on a PC can also
be saved to a DVD by using the provided software.
PREPARATIONS:
z Power switch (This burner) : Off
z PC Power : Off
A
Turn on the burner and the PC.
z Install the CyberLink Power2Go 5.5 Lite software if
you have not done so.
B
Insert a disc.
z We recommend you to use a compatible disc.
(0P25)
C
Use Power2Go to save to a DVD.
1. Use Power2Go to create a folder.
z You can create the desired folder names; however
do not use “EVERIO_V” or “EVERIO_S” as the
folder name.
z Use half-width alphanumeric characters when
entering the folder or file names. You can enter up
to 40 half-width characters.
2. Set the file system of the data tab in the Power2Go
setup menu to “UDF1.5”.
3. Copy files such as MPEG, JPEG and TPD into the
folder.
z For details on how to save, refer to the Power2Go
User’s guide, Help and ReadMe.
You can view User’s guide, Help and ReadMe from
the start menu of the PC.
z This burner cannot be used to write files into CD-R or
CD-RW. Also, it does not respond to all the functions
of Power2Go 5.5 Lite.
z To get customer support and to register the software,
you need the following product key (CD-Key):
PXNVM-NWE4G-XQD9Q-CU9DX-3FQFN-NAKUS
z Power2Go 5.5 Lite does not support conversion of
audio files to MP3 format.
z When the “Enter Activation Key” screen appears
while using Power2Go 5.5 Lite, close the screen
without entering the activation key.
.............................................................................
Removing USB Cable from PC
a Carry out removing of hardware on the PC.
b Remove the USB Cable.
CyberLink Power2Go 5.5 Lite can be used on
computers satisfying the following conditions.
„ Operating system:
Windows ா XP Home Edition [XP] (pre-installed)
Windows ா XP Home Professional [XP] (pre-installed)
„ Connector:
USB 2.0/1.1 connector
z If you use USB1.1 cable, it will take approximately 3
hours to write one DVD.
„ CPU:
Intel ா Pentiumா III, at least 800 MHz
(Intel ா Pentiumா 4, at least 2 GHz recommended)
„ RAM:
At least 128 MB (at least 256 MB recommended)
„ Free hard disk space:
At least 50 MB for installation
At least 5 GB recommended for making DVDs
„ Display:
Must be capable of displaying 800 c 600 dots
To Connect
Saving to a DVD
DC
AUDIO
COMPONENT VIDEO OUT
R
P R P B Y
L VIDEO
AC adapter
(provided for the burner)
USB
DC
Power supply outlet
Power cord
(provided)
PC
USB cable
(provided for the Everio
camera)
USB
Computers That Can Be Used
CU-VD40U_EN.book Page 12 Tuesday, March 27, 2007 9:40 AM