JVC TH-SW8 - Manual (Page 24)

Basic operations
19
The system turns off automatically when the specified period of
time has passed.
Press SLEEP.
Each time you press the button, the shut-off time changes.
Example:
To check the remaining time
Press SLEEP once.
To change the remaining time
Press SLEEP repeatedly.
To cancel
Press SLEEP repeatedly until “SLEEP OFF” appears.
• Turning off the power also cancels the Sleep Timer.
Press S.WFR +/– to adjust the subwoofer.
Press CENTER +/– to adjust the center
speaker.
Press SURR.-L +/– to adjust the surround
left speaker.
Press SURR.-R +/– to adjust the surround
right speaker.
NOTE
• You can also make adjustments by using the setup menu shown on the
TV screen. ( A pg. 38)
• The adjustments take effect for all sources.
• You cannot make this adjustment when FM or AM is selected as the
source.
Press TREBLE +/–.
NOTE
• The adjustments take effect for all sources.
The system can be accommodated to your TV’s scan mode.
NOTE
• To use the system in PROGRESSIVE mode, it is required that the
center unit is connected to the TV by using a component video cord
(not supplied). (
A pg. 13)
7 While DVD is selected as the source and stopped
1
Press and hold SCAN MODE for
2 seconds.
“RGB”, “Y/C”, or “PROGRESSIVE” appears on the display
window.
2
Press Cursor 3/2 to select the desired
mode.
• RGB: Select this when your TV accommodates
the interlaced RGB/composite video
signal.
• Y/C: Select this when your TV accommodates
the interlaced S-video signal.
• PROGRESSIVE: Select this when your TV equipped with
component jacks supports the progressive
video input.
You can get better picture quality in the order —
“PROGRESSIVE” > “RGB” > “Y/C” > Composite.
3
Press ENTER while the selected mode
is displayed.
When “PROGRESSIVE” is selected, the PROGRESSIVE
indicator lights on the display window.
NOTE
• Although the picture may be distorted when you press ENTER, this
is not a malfunction of the system.
• “RGB” is selected at your purchase.
Sleep Timer [SLEEP]
Adjusting the output level
of the subwoofer and
center/surround speakers
[SUBWFR, CENTER,
SURR L/R]
Adjusting the treble
sound [TREBLE]
S L E E P 6 0 m i n
minutes
Changing the scan mode
• There are some progressive TVs and High-Definition TVs that are
not fully compatible with this system, resulting in an unnatural
picture when playing back a DVD VIDEO in the progressive scan
mode. In such a case, change the scan mode to “RGB” or “Y/C”.
To check the compatibility of your TV, contact your local JVC
customer service center.
• All JVC progressive TVs and High-Definition TVs are fully
compatible with this system.
See page 17 for button locations.
TH-SW9SW8[B].book Page 19 Friday, March 12, 2004 1:02 PM