Sound and other settings, Pg. 36, A pg. 36) a – JVC TH-SW8 User Manual

Page 41

Advertising
background image

Advanced operations

36

IMPORTANT
Before using the remote control for the following
operation;
• Set the remote control mode selector to

AUDIO.

NOTE
Before you start operation;
• There is a time limit when doing the following steps. If the setting is

cancelled before you finish, start from step 1 again.

1

Press SETTING.

Example:

2

Press Cursor Y/5 to select the item
you want to set.

• BAL (Balance):

You can adjust the balance between the front left and front
right speakers.

• DEC (Decode):

When you play an external source (AUX DIGITAL is
selected as a source) that was encoded with Dolby Digital or
DTS Digital Surround, the following symptoms may occur;
• No sound comes out at the beginning of playback.
• Noise comes out while searching for or skipping chapters

or tracks.

AUT/PCM (Auto/PCM):

Normally select this. The system
automatically detects the incoming signals.

DOLBY D:

Select this if the symptoms above occur
when playing a disc (or software) encoded
with Dolby Digital.

DTS:

Select this if the symptoms above occur
when playing a disc (or software) encoded
with DTS Digital Surround.

• WRLS SP (Wireless speaker):

You can activate or deactivate the wireless transmission
function for the wireless receiver unit.
ON:

Select this when you connect the surround
speakers via the wireless receiver unit.

OFF:

Select this when you connect the surround
speakers to the powered subwoofer.

• WRLS CH (Wireless channel):

You can select the desired wireless channel (1, 2, 3, or 4) for
the wireless receiver unit depending on the condition of the
reception. Note that the channel on the center unit and the
wireless receiver unit should be the same. (

A pg. 12)

3

Press Cursor 3/2 to make an
adjustment or selection.

Example:

The adjustment is set and the display automatically disappears
a few seconds later.

NOTE
• When “DOLBY D” or “DTS” is selected, if a signal encoded with

another digital format comes in, you cannot listen to the sound. (The
GD or C indicator flashes.)

Sound and other settings

B A L : C E N T E R

B A L :

R

-- 5

See page 25 for button locations.

TH-SW9SW8[B]-06Advanced.fm Page 36 Thursday, April 1, 2004 12:17 PM

Advertising
This manual is related to the following products: