Pg. 59), Pg. 59) f, Hers – JVC SR MV45U User Manual

Page 59: Video in/out, Recording set, Display set, Others

Advertising
background image

Masterpage:Right+

EN

59

Filename [SR-MV45_55U_11Subsidiary.fm]

Page 59

January 10, 2007 1:18 pm

SUBSIDIARY SETTINGS

VIDEO IN/OUT

8

MONITOR TYPE

4:3LB

/

4:3PS

/

16:9AUTO

/

16:9FIX

You can select the monitor type depending on the TV used when
you play back DVD VIDEO discs recorded for wide-screen TVs. For
details, refer to “Monitor Set (DVD Deck Only)” (

੬ pg. 19).

8

FRONT AUX F-1

VIDEO

/

S-VIDEO

Select the appropriate mode depending on the connector (F-1)
being used on the front panel.

VIDEO

: To use the [VIDEO IN F-1] connector on the front panel.

S-VIDEO

: To use the [S-VIDEO IN F-1] input connector on the front

panel.

NOTE:
This setting is also applied to the VCR deck.

8

REAR AUX L-1

VIDEO

/

S-VIDEO

Select the appropriate mode depending on the connector (L-1)
being used on the rear panel.

VIDEO

: To use the [VIDEO INPUT] connector on the rear panel.

S-VIDEO

: To use the [S-VIDEO INPUT] connector on the rear

panel.

NOTE:
This setting is also applied to the VCR deck.

RECORDING SET

8

SAVE AS LIBRARY

OFF

/

ON

When this function is set to “ON”, the recording information is
automatically stored in the library. For details, refer to “Edit Library
Information” (

੬ pg. 44).

8

XP MODE REC AUDIO

DOLBY DIGITAL

/

LINEAR PCM

You can select the audio format when you record a program in XP
mode. When this function is set to “LINEAR PCM”, you can obtain
a high-quality audio sound.

DOLBY DIGITAL

: To record in Dolby Digital format.

LINEAR PCM

: To record in Linear PCM format.

8

DV AUTO CHAPTER

OFF

/

ON

When this function is set to “ON”, you can create chapters (marks)
when dubbing via the DV input terminal connecting the external DV
camcorder.

DISPLAY SET

8

SUPERIMPOSE

OFF

/

AUTO

When this function is set to “AUTO”, various operational indicators
appear on the TV screen.

OFF

: To turn off superimposed indications.

AUTO

: To superimpose operational indications for approximately

five seconds just after the corresponding operation.

NOTES:

● Even when “SUPERIMPOSE” is set to “OFF”, you can display the

various operational indicators by pressing ON SCREEN. To clear the
operational indicators, press ON SCREEN again.

● When you use this unit as the source player for editing, be sure to set

“SUPERIMPOSE” to “OFF” before starting. (

੬ pg. 53)

● When you select “AUTO”, during playback, the operation mode

indicators may be disturbed depending on the type of disc being
used.

8

GRAY BACK

OFF

/

ON

When this function is set to “ON”, the TV screen becomes all gray
when there is no signal input from the external input.
NOTE:
When you want to receive an unstable

external input with poor signals,

set this function to “OFF”.

8

DIMMER

BRIGHT

/

DIM

You can change the brightness of the front display panel.

BRIGHT

: Normally select this.

DIM

: To dim the front display panel.

8

POWER SAVE

OFF

/

ON

When this function is set to “ON”, you can reduce the power
consumption while the unit is turned off.
NOTES:

● During Power Save mode, it is not possible to engage the Tray Lock

function. (

੬ pg. 65)

● It takes some time for the unit to complete initialization after you turn

on unit power, with “WAKE UP” blinking on the front display panel.

● When “POWER SAVE” is set to “OFF”, the cooling fan on the rear of

the unit may be activated even if the unit is turned off.

8

ON SCREEN LANGUAGE

This unit offers you the choice to view on screen messages in 3
different languages.
For details, refer to “On-screen Language Set” (

੬ pg. 18).

OTHERS

8

RESUME

OFF

/

ON

/

DISC RESUME

When this function is set to “ON” or “DISC RESUME”, you can use
the resume function. (

੬ pg. 22)

OFF

: You cannot use the resume function.

ON

: You can start playback from the resume point of the placed

disc.

DISC RESUME

: The unit retains a memory of the resume points of

the last 30 discs played back, even though they have been
ejected.

NOTE:
“DISC RESUME” setting works on DVD VIDEO, VCD and already
finalized DVD-R/DVD-RW (video mode) discs. For other types of discs,
the function under “ON” setting will be applied even if “RESUME” is set
to “DISC RESUME”.

SR-MV45_55US.book Page 59 Wednesday, January 10, 2007 1:18 PM

Advertising
This manual is related to the following products: