Dubbing still images recorded on a tape to, A memory card, Pg. 38) – JVC CU-VH1 User Manual
Page 38: Dubbing (cont.)
38
EN
Master Page: Left
Still images can be dubbed from a tape to a memory
card.
1
Load a cassette. (
2
Load a memory card. (
3
Set the Playback Mode Switch to “VIDEO”.
4
Set the Power Switch to “ON” while pressing
down the Lock Button located on the switch.
5
Set “
COPY” to “ON”. (
6
Press 4/9 to start playback.
7
At the point you want to dub, press 4/9 again to
engage Still Playback.
8
To dub the image, press SNAP SHOT.
● The “
” indication appears during
dubbing.
● The selected image is stored in the memory
card.
NOTES:
● If SNAP SHOT is pressed in step 8 when a
memory card is not loaded, the message
“COPYING FAILED” is displayed.
● To use Playback Special effects with a video image
you wish to dub, perform up to step 8 using the
remote control (provided). (
● Images are dubbed in the following image sizes:
Scenes recorded in HD mode: 1280 x 720 pixels
Scenes recorded in SD mode: 848 x 480 pixels
Scenes recorded in DV mode: 640 x 480 pixels
Approximate Number of Storable Images
Dubbing Still Images Recorded On
A Tape To A Memory Card
Power Switch
SNAP SHOT Button
Play/Pause Button (4/9)
Playback Mode
Switch
MENU Button
RT Button
Image Size/Picture
Quality
SD Memory Card
8 MB
16 MB
32 MB
64 MB
640 x 480/FINE
30
68
144
297
640 x 480/
STANDARD
80
178
376
772
848 x 480/FINE
25
55
117
241
848 x 480/
STANDARD
66
148
313
643
1280 x 720/FINE
10
22
48
99
1280 x 720/
STANDARD
26
59
125
257
Image Size/Picture Quality
MultiMediaCard
8 MB
16 MB
32 MB
640 x 480/FINE
36
74
149
640 x 480/STANDARD
95
192
388
848 x 480/FINE
29
60
121
848 x 480/STANDARD
79
160
323
1280 x 720/FINE
12
24
49
1280 x 720/STANDARD
31
64
129
CU-VH1US_07Advanced.fm Page 38 Thursday, December 4, 2003 5:37 PM