System connections, Connection to a personal computer, A] using usb cable – JVC CU-VH1 User Manual

Page 43: B] using i.link cable

Advertising
background image

EN

43

Master Page: Right-Heading0

SYSTEM CONNECTIONS

[A] Using USB cable

It is possible to do the following things:

● Transfer still images stored on a memory card to a

PC.

[B] Using i.LINK cable

It is also possible to transfer still/moving images to a
PC with an i.LINK connector by using the software
equipped with the PC or commercially available
software.

● Set “i.LINK OUT” to “SW”. (੬ pg. 30)

● Set the i.Link Output Select Switch on this player

to the appropriate mode (

੬ pg. 35);

“DV”: when using the DV editing software
“MPEG2”: when using the MPEG2 editing
software

● Set the i.Link Output Select Switch to the

appropriate mode before connecting the i.Link
cable.

NOTES:

It is recommended to use the AC Power Adapter/

Charger as the power supply instead of the
battery pack. (

pg. 12)

Never connect the USB cable and the i.LINK

cable simultaneously to the player. Connect only
the cable you wish to use to the player.

Do not connect the player through a hub.

When using an i.LINK cable, be sure to use the

optional JVC VC-VDV206U or VC-VDV204U
i.LINK cable depending on the type of i.LINK
connector (4 or 6 pins) on the PC.

If the PC connected to the player via the USB

cable is not powered, the player does not enter the
USB mode.

The date/time information cannot be captured into

the PC.

Refer to the instruction manuals of the PC and

Software.

The still images can also be transferred to a PC

with an i.LINK connector-equipped capture board.

The system may not work properly depending on

the PC or capture board you are using.

Connection To A Personal Computer

[A] Using USB cable

To USB

PC

PC with i.LINK

connector

USB cable (provided)

To i.LINK

[B] Using i.LINK cable

To USB connector

To i.LINK

connector

i.LINK cable

(optional)

OR

“USB MODE” and/or “ACCESSING FILES”
appears on the LCD monitor while the PC is
accessing data in the player or the player is
transferring a file to the PC.
NEVER disconnect the USB cable while
“ACCESSING FILES” is displayed on the LCD
monitor since this can result in product damage.

AD

V

A

NCED FE

A

TURE

S

CU-VH1US.book Page 43 Friday, November 28, 2003 8:01 PM

Advertising
This manual is related to the following products: