Remote programming – JVC AV 32F704 User Manual

Page 19

Advertising

You can program your remote to operate your cable box, satellite receiver, VCR or DVD
player by using the instructions and codes listed below. If the equipment does not respond to
any of the codes listed below or to the code search function, use the remote control supplied
by the manufacturer.

��

��
��
��
��
��
��
��

��
��
��
��

��
��

��

��
��

��

��
��
��

��

��

��

��
��
��
��

��
��

��

��
��

��

��

��

��
��

��

��
��
��

��

The remote control is programmed with cable box and satellite codes for power on/off,
channel up/down, and 10 key operation.

1) Find the cable box or satellite brand from the list of codes shown below.
2) Slide the 2-way selector switch to “CATV”.
3) Press and hold down the D

ISPLAY

button, then enter the first code number listed with the 10

key pad.

4) Release the D

ISPLAY

button, and confirm the operation of the cable box/satellite receiver.

• If your cable or satellite box does not respond to the first code, try the others listed. If it does

not respond to any code, try the search codes function, on page 22.

Remote Programming

Setting the CATV, VCR and DVD Codes

Cable Box or Satellite Codes

GJ English

4/24/03, 12:50 PM

Advertising

This manual is related to the following products:

AV 27F704, AV-27FA44, AV-32FA54, AV-36F704, AV-27FA54

Popular Brands

Popular manuals