JVC AV 32F704 - Manual (Page 25)

Initial Setup
25
Auto Tuner Setup
The auto tuner setup function is described on page 18 as the interactive plug-in menu. If you
need to run the auto tuner setup again, follow the steps below.
Press the M
ENU
button
π† To AUTO TUNER SETUP
è To operate
è To choose CABLE or AIR
† To move to START
è To start Auto Tuner Setup
Programming will take approximately 1 to 2 minutes. The auto tuner is finished when the
message PROGRAMMING OVER! appears onscreen.
Channel Summary
Channel summary allows you to customize the line-up of channels received by your TV. You
can add or delete channels from the line-up or prevent any unauthorized viewers from watching
any or all 181 channels.
Press the M
ENU
button
π† To CHANNEL SUMMARY
è To operate
The Channel summary screen will now be displayed with
the channels set to scan marked with an “¸”. You can
delete channels from the scan by removing the “¸”. If any
channels were missed during auto tuner setup and you
wish to add them, you may by placing an “¸” next to the
channel number.
π† To the SCAN column
è To include or delete from scan
Press the E
XIT
button when finished
You can block access to a channel by activating the channel lock.
Press the M
ENU
button
π† To CHANNEL SUMMARY
è To operate
π† To the Lock Column ( )
Press the Z
ERO
button to lock or unlock that channel
Press the E
XIT
button when finished
� � � � � � � � � � � � � �
� � � � � � � � � � � � � � � �
� � � � �
� � � � � � � � �
� �
� �
� � � � � � � � � � � � � � � � �
� � � � � � � � � � � � � � �
� � � �
� � � � � � � � � � � � � �
� � � � � � � � � � � � � � �
�
�
�
�
�
�
�
�
�
� �
� � � � � � � � � � �
� � � � � � � � � � � � � � � � � � � � � �
� �
� �
� �
� �
�
� � � � � � � � �
�
� �
� � � � � � � � � �
GJ English 4/24/03, 12:50 PM 25