Jacuzzi J - 355 - Manual (Page 38)

34
J-300 Series
12.3 pillow Care
Remove and clean the headrest pillows as needed with soapy water
using a cloth or soft-bristle brush. Always remove the pillows when
adding chemical shock treatment to the spa water. When the sanitizer
reading is below 4.0 ppm, pillows can be reinstalled.
CauTIon: Never attempt to remove the pillows by pulling on
the complete assembly! The pillows utilize a bolt-on design
that prohibits removal without tools.
!
To remove pillows:
1. Grasp pillow insert (A) with finger tips and
gently pry outward from pillow base (C).
2. Use a standard screwdriver to loosen and
remove mounting bolts (B) from pillow
base.
3. Assemble in reverse order after cleaning.
DO NOT overtighten pillow mounting
bolts!
12.4 Cleaning The spa Interior
To preserve the sheen of your spa’s surface, it is crucial that you avoid
using abrasive cleaners or cleaners which have adverse chemical effect
on the surface. If you are not certain as to the suitability of a particular
cleanser, consult your authorized Jacuzzi dealer. Regardless of the
cleanser used, use extreme care to assure that no soap residue is left on
the surface. This could cause severe sudsing when the spa is refilled.
12.5 maintaining the Cover
Using the Jacuzzi insulating spa cover anytime the spa is not in use will
significantly reduce your operating costs, heat-up time and maintenance
requirements. To prolong the life of the cover, handle it with care and
clean it regularly using mild soap and water. Periodic treatments with a
special conditioner developed for Jacuzzi spa covers will help protect
against deterioration caused by UV rays from the sun. Never allow
anyone to stand or sit on the cover, and avoid dragging it across rough
surfaces.
12.6 Maintaining the synthetic Cabinet
Your new spa’s synthetic cabinet requires little or no maintenance of
any kind. To clean, simply wipe cabinet with a clean towel and mild soap
solution.
34