J-300 series – Jacuzzi J - 355 User Manual

Page 55

Advertising
background image

51

J-300 series

J-300 Series

11.

sub-woofer (subw) button: Press the SUB-W button to activate

the Sub-woofer function On, and “Sub-woofer” will appear on the

LCD display for 3 seconds. Press the SUB-W button again to turn off

the Sub-woofer function.

12.

2 Zone Button: The feature is not used.

13.

iX-Bass Button (XBas) Button: Press the iX-BASS button to turn

on the iX-BASS function, and “iX-BASS” will appear in the LCD

display for 3 seconds. Press the iX-BASS button again to turn off the

iX-Bass function.

14.

as/Ps (automatically store/Preset scan) button: While in seek

mode the stereo unit will automatically select 6 strong stations and

store them in the current band. Select a band (if needed).

preset scan:

Scan stations stored in the current band. Select a

band, press AS/PS button for less than 3 seconds. The unit will

pause for ten seconds at each preset station. Press AS/PS button

again to stop scanning when the desired station is reached.

stereo:

The unit will automatically pick up a stereo signal when

available. When in stereo mode, the ST icon appears in the display.

When no stereo signal is available, the unit will automatically revert

to mono operation, and no icon will be displayed.

15.

Preset 1/Pause Play button: In Tuner mode, any station can be

stored as preset 1 by pressing and holding this button for 2 seconds,

after the desired station is selected. To recall the station preset,

simply press and release this button. In CD mode, pressing this

button will pause or play the CD. When inserting a CD make sure the

label side is facing up.

16.

Preset 2/int button: In Tuner mode, any station can be stored as

preset 2 by simply pressing and holding this button for 2 seconds,

after the desired station is selected. To recall the station preset, simply

press and release this button. In CD mode, pressing this button will

preview each song on the disc for about 10 seconds. Press again to

turn off this feature or once the desired track is reached.

17.

Preset 3/rPt button: In Tuner mode, any station can be stored

as preset 3 by simply pressing and holding this button for several

seconds, after the desired station is selected. To recall the station

preset, simply press and release this button. In CD mode, pressing

this button will play a song repeatedly. Press again to turn off this

feature.

51

Advertising
This manual is related to the following products: