Brightness adjustment of the display, Tripod mounting, Loading/unloading a cassette – JVC GR-X5EK User Manual
Page 16: 16 tripod mounting, 16 loading/unloading a cassette, Pg. 16)
16
EN
MasterPage: Left
1
Set the power switch to
“M” or “PLAY” while
pressing down the lock
button located on the
switch.
2
Open the LCD monitor
fully. (
3
Press MENU. The
menu screen appears.
4
Press Up (
4
/9
)
or
Down (8) to select “n”,
and press SET. The
CAMERA DISPLAY or
VIDEO DISPLAY menu appears.
5
Press Up (
4
/9
)
or Down (8) to select
“BRIGHT”, and press SET. The menu screen
closes and the brightness control indicator
appears.
6
Press 3 or 5 until the appropriate
brightness is reached.
7
Press SET to clear the brightness control
indicator from the display.
LCD monitor’s backlight
For normal use, turn the backlight on (bright).
If you are shooting in a bright location, turning
the LCD backlight off makes the display darker
and easier to see. It also reduces battery
consumption.
To turn off the LCD backlight, press LCD
BACKLIGHT.
● To turn on the LCD backlight, press LCD
BACKLIGHT again.
To attach the camcorder
to a tripod, align the
direction stud and screw
to the mounting socket
and stud hole on the
camcorder. Then tighten
the screw clockwise.
● Some tripods are not
equipped with studs.
The camcorder needs to be powered up to load
or eject a cassette.
1
Slide and hold OPEN/EJECT in the direction
of the arrow, then pull the cassette holder cover
open until it locks. The cassette holder opens
automatically.
● Do not touch internal components.
2
Insert or remove a tape and press “PUSH
HERE” to close the cassette holder.
● Be sure to press only the section labeled “PUSH
HERE” to close the cassette holder; touching
other parts may cause your finger to get caught in
the cassette holder, resulting in injury or product
damage.
● Once the cassette holder is closed, it recedes
automatically. Wait until it recedes completely
before closing the cassette holder cover.
● When the battery pack’s charge is low, you may
not be able to close the cassette holder cover. Do
not apply force. Replace the battery pack with a
fully charged one or use AC power before
continuing.
3
Close the cassette holder cover firmly until it
locks into place.
● Be careful not to pinch your fingers by the
cassette holder cover.
Brightness Adjustment of the
Display
Tripod Mounting
BRIGHT
MENU
Up
(
4/9)
Down
(
8)
LCD
BACKLIGHT
Loading/Unloading a Cassette
Make sure the window
side is facing out.
Cassette holder
cover
Cassette holder
PUSH HERE
OPEN/
EJECT
Erase protection
tab
GR-X5PAL.book Page 16 Thursday, April 7, 2005 7:23 PM