JVC AV-48P787 - Manual (Page 56)

56
Button Functions
Turns the TV on or off.
Press the P OWER button
Use the number buttons on the remote control to move directly to a specific channel. For
example, to move to channel 12:
0 (Z ERO )
1 (O NE )
2 (T WO )
Power
Number Buttons - 10Key Pad
Tune
Selects the signal input source for the television: Video-1, 2, 3, 4, Digital-In1 or Digital-In2 for
video devices like VCR’s DVD players, or camcorders.
Press the I NPUT button
By every press of the I NPUT button, you can change the input mode.
Notes:
• When you return to TV mode, press the R ETURN +/TV button or direct 10 key pad.
• You can also access the "Front Menu" screen by using the M ENU button on the side of the TV
instead of the remote control. It has "Input", "Video Status" and "Aspect" menus. Choose
"Input" by pressing Menu† on the side panel and choose a mode by using the C
HANNEL +/-
buttons ( √ OPERATE ® ).
Input
Use these buttons to move up or down all the available channels your TV is able to receive,
and navigate in the menus.
Channel +/–
Use these buttons to raise or lower the TV’s volume level, and navigate in the menus. The
maximum is the level you set in Volume Limit. See page 53.
Volume +/–
Lets you decide the input channel and select it. After you press the number buttons on the
remote, press the T
UNE button. For example, to move to channel 12:
1 (O NE )
2 (T WO )
Press the T UNE button
LCT2121-001A-A English.indd 56 LCT2121-001A-A English.indd 56 6/21/06 9:30:43 AM 6/21/06 9:30:43 AM