JVC KS-FX725R - Manual (Page 23)

23
ENGLISH
Setting the clock
You can also set the clock system to either 24 hours
or 12 hours.
1
Press and hold SEL (select) for more
than 2 seconds so that one of the PSM
items appears on the display.
(See page 24.)
2
Set the hour.
1 Select “CLOCK H (hour)” if not shown on
the display.
2 Adjust the hour.
3
Set the minute.
1 Select “CLOCK M (minute).”
2 Adjust the minute.
4
Set the clock system.
1 Select “24H/12H.”
2 Select “24H” or “12H.”
5
Press SEL (select) to finish the setting.
OTHER MAIN FUNCTIONS
To check the current clock time or change the
display mode
Press DISP (display) repeatedly. Each time you
press the button, the display mode changes as
follows:
• During tuner operation:
Notes:
* For the indication change during RDS operation,
see page 14.
* For the indication change during DAB operation,
see page 31.
• During tape operation:
• During external component operation:
(Only for KS-FX725R)
• During CD changer operation:
(Only for KS-FX725R)
• During power off:
The power turns on, the clock time is shown for
5 seconds, then the power turns off.
Clock Frequency
Clock Play mode (tape direction)
2 1
2 1
1 2
Clock LINE IN
Changing the general settings
(PSM)
You can change the items listed on the next page
by using the PSM (Preferred Setting Mode) control.
Basic Procedure
1
Press and hold SEL (select) for more
than 2 seconds so that one of the PSM
items appears on the display.
(See page 24.)
2
Select the PSM item you want to
adjust. (See page 24.)
Clock Elapsed playing time Disc number
EN23-26KS-FX725R_F525[EE]f.pm5 7/12/01, 9:53 AM 23