Jonsered GR 2036 - Manual (Page 29)

English –
29
TECHNICAL DATA
Technical data
Engine
Displacement, cu. in/cm
3
Cylinder bore, inch/mm
Stroke length, inch/mm
Idling speed, rpm
Recommended max. speed, rpm
Speed of output shaft, rpm
Max. engine output, acc. to ISO 8893
Catalytic converter muffler
Speed-regulated ignition system
gnition system
Manufacturer/type of ignition system
Spark plug
Electrode gap, inch/mm
Fuel lubrication system
Manufacturer/type of carburetor
Fuel tank capacity, US pint/litres
Weight
Weight without fuel, cutting tool and
guard, Lbs/kg
Sound levels (se note 1)
Equivalent sound pressure level at the
user’s ear, measured according to ANSI
B175.3-1997, dB(A), min/max:
Vibration levels
Vibration levels on the handles, measured
according to ANSI B175.3-1997, m/s
2
When idling, left/right handles, min:
When idling, left/right handles, max:
At max. speed, left/right handles, min:
At max. speed, left/right handles, max:
GR 2032D
1,88/30,8
1,38/35
1,26/32
2 700
11 000-11 700
10 000
1,1 KW/ 8 400 rpm
Yes
Yes
Walbro CD
Champion RCJ 7Y
NGK BPMR7A
0,02/0,5
Walbro WT
1,06/0,5
14,3/6,5
90/100
2,5/2,5
3,0/3,5
2,0/2,0
5,1/4,9
GR 2036
2,21/36,3
1,50/38
1,26/32
2 700
11 000-11 700
10 000
1,3 KW/ 9 000 rpm
Yes
Yes
Walbro CD
Champion RCJ 7Y
NGK BPMR7A
0,02/0,5
Walbro WT
1,06/0,5
16,1/7,3
92/101
2,2/2,7
2,7/4,3
3,5/5,0
4,5/6,2
GR 2026D
1,64/26,9
1,38/35
1,10/28
2 700
11 000-11 700
10 000
0,9 KW/ 9 000 rpm
Yes
Yes
Walbro CD
Champion RCJ 7Y
NGK BPMR7A
0,02/0,5
Walbro WT
1,06/0,5
13,2/6,0
93/99
2,0/2,2
2,2/3,0
1,8/2,1
2,5/3,6
Note 1: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under various
working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.
NOTE! Sound pressure at the user’s ear and vibration on the handles are measured with all the machine’s approved cutting
equipment fitted. The table indicates the highest and lowest values.