Jwin JC-CD260 - Manual

Instruction Manual
CAR CD 12/45SEC / Mp3 120SEC ASP PLAYER
RECEIVER (AM/FM)
DETACHABLE FRONT PANEL
FUNCTION OF CONTROLS
-- 1 --
R
JC-CD260
DISP RPT RDM SCAN ALL DIR SONG
MUSIC MUTE LOUD MONO AF PTY EON
JAZZ
CLASSIC
LUD
LUD
SCN 3 RPT 4 RDM 5 D-DN 6 D-UP MODE
BND MUT CLK
ST LOC LUD
LUD
1 A/PS 2 INT
L E S
H S U P
60 WATT/DIGITAL TUNING SYSTEM
M P 3 C D / C D / C D - R / C D - R W P L A Y E R
6 7
8
9
10
12
1
2
3
4 13 11 15
18
DISP RPT RDM SCAN ALL DIR SONG
MUSIC MUTE LOUD MONO AF PTY EON
JAZZ
CLASSIC
LUD
LUD
SCN 3 RPT 4 RDM 5 D-DN 6 D-UP MODE
BND MUT CLK
ST LOC LUD
LUD
1 A/PS 2 INT
L E
S
H S U P
60 WATT/DIGITAL TUNING SYSTEM
Mp3 CD/C D / C D - R / C D - R W P L A Y E R
5 14 16
17 19
20 21 23
FUNCTIONS
CONTROL
1.POWER ON/OFF
Press any key to power up the unit.
Press this key for more than 1 second to turn off unit.
2,3. SEL (control mode select)/MENU KEY
Push to select the desired mode,VOL(volume),BAS(bass),TRE(treble)
BAL(balance),or FAD(fader).
This button normally functions as the volume control.Adjust the level
rotate(3) after selecting the desired control mode.Otherwise the mode
will go back to the volume control mode.
Control Mode
Volume control
Bass control
Treble control
Balance control
Fader control
For less volume
For less bass
For less treble
To decrease the right speaker volume
To decrease the front speaker volume
For more volume
For more bass
For more treble
To increase the left speaker volume
To increase the rear speaker volume
MENU KEY
Hold the SEL key to choose the menu.
22
Turn clockwise: Turn counter clockwise:
1) menu1:
Rotate the SEL knob Press and hold longer than one second to activate the DSP feature. to select
DSP mode sound effect as shown in sequence below.User setting value of bass/treble in normal
mode is always memorized.In rock/classic/pops mode,bass/treble mode is skipped and level is
not changeable
FLAT----CLASSICS----POP M----ROCK M----DSP OFF.
Bass and Treble gain of each mode is as shown in below table.
Initial value of bass/treble in NORMAL mode is 0 dB.