JVC HD-70G887 - Manual (Page 52)

52
Onscreen Menus
This feature is used if you have a DTV or HDMI compatible component connected to your TV.
Press the M ENU button
π† To DIGITAL-IN1 AUDIO
è To select ANALOG, DIGITAL or AUTO
Press the Menu button when fi nished
Notes:
• If your DTV or HDMI component is capable of digital
audio and video, choose DIGITAL. If your DTV or HDMI
component is capable of analog audio and digital video, choose ANALOG.
• Refer to your DTV or HDMI component’s instruction manual for more information.
• When you select AUTO, the television will select "ANALOG" or "DIGITAL" automatically,
depending on the audio input from the HDMI.
• When you select DIGITAL, select PCM on Digital Sound menu. See page 54.
• When your input is DIGITAL-IN2, DIGITAL-IN AUDIO cannot be selected.
INITIAL SETUP
SELECT OPERATE EXIT MENU
NEXT PAGE
PREVIOUS
(1/5)
DIGITAL-IN
DIGITAL-IN1 AUDIO
SIZE1
DIGITAL
The DIGITAL-IN option can only be displayed in the INITIAL SETUP menu when an HDMI480p
picture signal is being input to the DIGITAL-IN terminal. This option adjusts the position when
an HDMI or DVI 480p picture signal is being displayed on the screen. There are two types of
HDMI480p picture signals: 640x480 and 720x480. If the displayed picture is slightly shifted, the
position can be adjusted by selecting either SIZE1 or SIZE2.
Press the M ENU button
π† To DIGITAL-IN
è To enter
π† To select AUTO, SIZE1 or SIZE2
Press the M ENU button to finish
Digital-In
Digital-in1 Audio
INITIAL SETUP
SELECT OPERATE EXIT MENU
NEXT PAGE
PREVIOUS
(1/5)
DIGITAL-IN
DIGITAL-IN1 AUDIO
SIZE1
DIGITAL
Notes:
• The DIGITAL-IN menu can only be displayed when a HDMI or DVI 480p picture signal is
input to the Digital-In terminal and the picture is being displayed on the screen.
• You can select AUTO only when the signal is 480p for HDMI. When you select AUTO, the
televison will select "SIZE1" or "SIZE2" automatically.
LCT2063-001C-A ENG.indd 52 LCT2063-001C-A ENG.indd 52 8/10/06 8:56:49 AM 8/10/06 8:56:49 AM