Recording features, Instant timer recording (itr), O lamp (video) – JVC DR-MH30S User Manual

Page 36: Pg. 36, Pg. 36, 39, Pg. 36) or time

Advertising
background image

Filename [DR-MH30EU_05DVD Operation.fm]

Masterpage:Left+

36

EN

BASIC OPERATIONS ON DVD DECK

Page 36

Tuesday, 1 June 2004 17:05

Instant Timer Recording (ITR)

This easy method lets you record for from 30 minutes to 6 hours
(selectable in 30-min. increments), and shuts the unit off after
recording is finished.

1

Press 7 on the unit to start recording.

2

Press 7 again to engage the ITR mode.

● On the front display panel, “0:30” appears.

3

If you want to record for more than 30 minutes, press 7 to

extend the time. Each press extends recording time by 30 minutes.

NOTES:

● You can only perform ITR using the 7 button on the unit.

● If “DIRECT REC” is set to “ON” in the menu, Instant Timer Recording

(ITR) function does not work. (

੬ pg. 68)

● When the recording capacity becomes full during timer recording or

Instant Timer Recording, the unit automatically performs “Relief
Recording” (

੬ pg. 46).

Watch Another Programme While Recording On The
Unit

While recording is going on, you can watch another programme on
the TV by using the TV’s tuner.
NOTE:
It is required that the remote control is set to be able to operate the TV
in advance. (

੬ pg. 63)

1

During recording, press TV AV/VIDEO to select TV mode.

● Video mode is disengaged and the video lamp (VIDEO) on the unit is

turned off.

● The programme received on the TV’s tuner is displayed on the TV

screen.

2

Slide the TV/CABLE/SAT/DVD switch to TV.

3

Press PR +/– repeatedly to select the desired channel.

NOTE:
If a decoder is connected to the unit (

੬ pg. 66), you can select a

scrambled channel as well as other normal channels.

Elapsed Recording Time And Disc Remaining Time
Indication

During recording, press DISPLAY repeatedly until the desired
indication appears on the front display panel.

● Each time you press DISPLAY, the time indication changes as

follows:
Elapsed recording time ] Disc remaining time ] Clock ] (Back to
the beginning)

Recording Features

● Turn on the unit.

● Turn on the TV and select the AV mode.

● Slide the TV/CABLE/SAT/DVD switch to DVD.

● Press DVD so that the DVD lamp lights up on the unit.

7

DVD

TV AV/ VIDEO

DISPLAY

DVD

PR+/-

CABLE/DBS

DVD

TV

DR-MH30EU_00.book Page 36 Tuesday, June 1, 2004 5:34 PM

Advertising
This manual is related to the following products: