JVC MC-8200LU - Manual (Page 17)

E17
ENGLISH
Control Panel Operations and LCD Display
4-4. Display and operation sequence
The sequence of display and operation after turning the power on is as shown below.
POWER ON
1. NORMAL DISPLAY
2. ERROR DISPLAY
Power On
INITIALIZING
Pattern 1
Normal display
Pattern 2
SELECT SELECT
MODE
SELECT
ENTER
Error display 1
3. ID No. DISPLAY
SELECT
SELECT
SELECT
SELECT
ENTER
4. PANEL OPEN MODE
ENTER
SCSI-ID display
Error display 2
Error display 8
SELECT
SELECT SELECT
DR1 :
DR2 :
DR6 :
SELECT
SELECT SELECT
SELECT
SELECT
5. DOOR OPEN MODE
SELECT
ENTER
PUSH SELECT
PUSH SELECT
EXECUTING ...
... CAN BE OPENED
SELECT
SELECT
6. ID No. SET MODE
7. COUNT DISPLAY
8. IMPORT/EXPORT
ENTER
ENTER
ENTER
ENTER
SELECT
9. DRIVE DISPLAY
PUSH SELECT
PUSH SELECT
ID No. display
ID No. entry
SELECT
SELECT
SELECT
ENTER
Input ID No.
SELECT
SELECT
SELECT
9. DR6
SELECT
10. FL
SELECT
SELECT
2. CR
1. TOTAL
PUSH SEL. KEY
PUSH SEL. KEY
Input the start
tray No.
Input the end
tray No.
Start accessing
ENTER
ENTER
* 1
• If the MODE, SELECT or ENTER key has not been pressed within 10
seconds, the current display will return to “Normal display - Pattern 1”
(except in a situation when an event is displayed or the Import/Export Tray
numbers and SCSI-ID numbers are being input).
*1. When the MC-CF10U Optional
Carrier is installed.