Names and functions of parts, 1. front panel, right side panel, rear panel – JVC MC-8200LU User Manual
Page 6
E6
2. NAMES AND FUNCTIONS OF PARTS
1
POWER switch ................... Turns the main unit power on/off. " | ":ON. "
⅜ ":OFF.
2
POWER Indicator ............... Lights up when the POWER switch is turned on. Blinks in case of error during operation.
3
LCD Display Panel ............. Shows information using alphanumeric characters.
4
MODE key .......................... Used for LCD display page selection and other operations.
5
SELECT key ....................... Used for switching displayed information and other operations.
6
LOAD/EJECT key ............... Opens or closes the mail slot.
7
ENTER key ......................... Used for LCD page selection and other operations.
8
10-key ................................. Used for selecting tray Nos. and changer SCSI ID Nos. for import/export operations.
9
Mail slot .............................. Used for disc insertion/ejection
0
Key cylinder ....................... After completing the door opening mode, insert a key and turn it counterclockwise to open
the door.
!
Rear panel .......................... Opened and closed when installing or replacing drive units.
@
SCSI connector ................. One SCSI connector port system is provided as standard.
#
RS-232C connector ........... 9-pin D-sub connector (plug) for use in maintenance.
$
AC inlet (main unit) ........... Insert the provided power cord and plug the other end of the power cord to a 120 V-240 V, 50
Hz/60 Hz AC power outlet.
%
Side panel .......................... To be removed in servicing.
2-1. Front panel, right side panel, rear panel
ⅥMC-8200LU (MC-8600LU)
Front panel
Right side panel
Rear panel
9
0
1
POWER
MODE
SELECT
LOAD/EJECT
MAIL SLOT
1
2
3
4
5
6
7
8
9
0
E
3
4
8
7
6
2
5
Control panel : the control panel consist of the keys
2
-
8
and the LCD display screen.
%
!
$
#
@
SCSI-C