JVC Procision DLA-HD990 - Manual (Page 28)

4 Settings
28
The structure of the Settings menu
The menu for this device is structured as follows:
Picture Adjust
01 Picture Mode
Adjusts the pattern of the projected image.
Setting: Cinema 1, Cinema 2, Cinema 3, Natural, Stage, Dynamic, User 1, User 2, THX
02 Contrast
Adjusts the contrast of the projected image.
Setting: –50 to 50
03 Brightness
Adjusts the brightness of the projected image.
Setting: –50 to 50
04 Color
Adjusts the color density of the projected image.
Setting: –50 to 50
05 Tint
Adjusts the hue of the projected image.
Setting: –50 to 50
06 Color Temp.
Sets the color temperature of the projected image.
Setting: 5800K, 6500K, 7500K, 9300K, High Bright, Custom 1, Custom 2, Custom 3
07 Gamma
Sets the gradation characteristics of the projected image.
Setting: Normal, A, B, C, D, Custom 1, Custom 2, Custom 3
08 Advanced
Adjusts the contours of the image and detailed composition of the image.
Setting: Sharpness, NR, CTI, Color Management, Clear Motion Drive
09 Lens Aperture
Sets the lens aperture.
Setting: –15 to 0
10 Reset Reset the setting.
Input Signal
11 HDMI
Configures HDMI input signal.
Setting: Input, Color Space, Control with HDMI
12 COMP.
Configures the input signal for the component video input terminals.
Setting: Y Pb/Cb Pr/Cr, RGB, SCART
13 Video/S-Video
Configures the Video/S-Video input signals.
Setting: NTSC, Setup Level, Color System
14 PC
Configures PC input.
Setting: Auto Alignment, Tracking, Phase, Picture Position
15 Picture Position Adjusts the horizontal/vertical position of the projected image.
16 Aspect (Video)
Configures the screen size of the projected image.
Setting: 4:3, 16:9, Zoom
17 Aspect (Computer)
Configures the screen size of the projected image.
Setting: Auto, 1:1, Full
18 V-Stretch
When set to “On”, the projected 2.35:1 image will be stretched vertically to the panel resolution.
Setting: On, Off
19 Over Scan
Selects whether or not to set over scan for the SD video signal.
Setting: On, Off
20 Mask
Masks (Hides) the outer area of the projected image.
Setting: 2.5, 5, Off
21 Film Mode
Selects this to view movies shot on film.
Setting: Auto, film, Off
CAUTION
●
There are items that cannot be modified
without entry.