JVC MP-XP7210GB - Manual (Page 57)

EN
57
Connecting to a network
With the network function, you can connect to a network at your office or home to transfer data
between PCs and access the Internet from multiple PCs. For setting for intranet connection,
consult a system administrator at your company. Connection to a network requires the following
items.
• LAN cable
• Communication devices including a hub or router
Important
LAN cables are available in straight and cross types. Use a cable of the correct type for your
LAN environment.
You must contract with an Internet service provider.
Using a LAN cable, connect the LAN connector on the unit with a communication device (hub
or router).
See the following for setting.
Setting for network connection
¡Setting the IP address manually
Important
This PC will acquire the necessary initial settings automatically. When you use this PC in
a home network environment and the IP address is assigned automatically, the following
steps are not necessary.
1 Click the [start] button and [Control Panel].
2 Click the [Network and Internet Connections] icon.
3 Click the [Network Connections] icon.
The “Network Connections” screen will appear.
XP7210/3210EN-48-65 02.8.6, 7:57 PM 57