Precautions, Do not place the unit, Avoid violent shocks to the unit during transport – JVC LPT1056-001A User Manual

Page 10: Connections, Connecting to a tv

Advertising
background image

10

Precautions

When the equipment is installed in a cabinet or a shelf, make
sure that it has sufficient space on all sides to allow for
ventilation (10 cm or more on both sides, on top and at the rear).

When discarding batteries, environmental problems must be
considered and the local rules or laws governing the disposal of
these batteries must be followed strictly.

Failure to heed the following precautions may result in
damage to the unit, remote control or disc.
1. DO NOT place the unit —

— in an environment prone to extreme temperatures or

humidity.

— in direct sunlight.
— in a dusty environment.
— in an environment where strong magnetic fields are

generated.

— on a surface that is unstable or subject to vibration.

2. DO NOT block the unit’s ventilation openings or holes.

(If the ventilation openings or holes are blocked by a
newspaper or cloth, etc., the heat may not be able to get
out.)

3. DO NOT place heavy objects on the unit or remote

control.

4. DO NOT place anything which might spill on top of the

unit or remote control.
(If water or liquid is allowed to enter this equipment, fire or
electric shock may be caused.)

5. DO NOT expose the apparatus to dripping or splashing.
6. DO NOT use this equipment in a bathroom or places

with water. Also DO NOT place any containers filled with
water or liquids (such as cosmetics or medicines, flower
vases, potted plants, cups, etc.) on top of this unit.

7. DO NOT place any naked flame sources, such as lighted

candles, on the apparatus.

8. AVOID violent shocks to the unit during transport.

Connections

Tips:
Depending on your TV and other equipment there are

various ways you can connect the player.

Please refer to the manuals of your TV, VCR, stereo

system or other devices as necessary for additional
connection information.

Notes:

The picture and sound of a nearby TV, VCR, or radio may be

distorted during playback. Position the units away from each
other or turn off the unit after removing the disc.

Make sure the DVD+VCR is connected directly to the TV and

tune the TV to the correct video input channel.

Do not connect the DVD+VCR’s AUDIO OUT jack to the

phono in jack (record deck) of your audio system. Do not
connect the DVD+VCR via another VCR. The DVD image
could be distorted by the copy protection system.

Connecting to a TV

Make one of the following connections, depending on the
capabilities of your existing equipment.

Basic connection (AV)

1. Connect the EURO AV1 AUDIO/VIDEO on the rear

panel of this unit to the SCART input socket on the
TV using a SCART lead (not supplied).
For TV without SCART, connect the yellow VIDEO
OUT jack and DVD/VCR AUDIO OUT jacks of this
unit to the TV.

2. Some TV broadcasters transmit encoded television

signals which you can only see with a purchased or
rented decoder. You can connect such a decoder
(descrambler) to this unit.

Basic connection (RF)

1. Connect the RF antenna cable from your indoor/

outdoor antenna to AERIAL jack on the rear panel of
this unit.

2. Connect the supplied RF antenna cable from the

RF.OUT jack on the rear panel of this unit to your
television’s Antenna Input.

VIDEO IN

AERIAL

AUDIO INPUT

L

R

SCART INPUT

Rear of TV

Satellite or Set Top Box

Rear of this unit (Basic connection)

VJ9033CP1Z_E-EZ.book Page 10 Friday, March 11, 2005 10:12 AM

Advertising
This manual is related to the following products: