Showview programming, Press showview, Press enter/ok – JVC LPT1056-001A User Manual
Page 22: Press 1 to select the recording speed, Press í/i to end recording, Timer recording using on screen display -24, Operation with tape showview programming
22
Operation with tape
ShowView Programming
ShowView greatly simplifies entering the date,
channel, start and end times of a Timer Recording
by simply entering a ShowView Code. ShowView
Codes are published in most TV guide magazines;
they can vary one to nine numbers in length.
S
HOW
V
IEW
is a registered trademark of Gemstar
Development Corporation.
The S
HOW
V
IEW
system is manufactured under
license from Gemstar Development Corporation.
1. Make sure that TV channels have been tuned and
stored in correct SHOWVIEW order.
Insert a video cassette with protection tab into your
DVD+VCR.
2. Press SHOWVIEW.
3. Press the numbered buttons to enter the
ShowView Code of the TV programme that you
wish to record.
If you make a mistake press
2 then enter the
revised number.
4. Press ENTER/OK.
If PLEASE CHECK is displayed it means that you
have entered the wrong ShowView number, entered
the ShowView number incorrectly.
If “- -” is displayed, you have to enter the programme
number of the station, you want to record from.
5. Press
2 or 1 to select the settings that you wish to
revise. (PR, DATE, TIME and SP).
Press
3 or 4 to enter the correct information.
6. Press
1 to select the recording speed.
Press
3 or 4 to select the desired tape speed (SP,
IP, or LP).
IP mode determines how much tape is left and
switches speed from SP to LP, if necessary, to
complete recording the program.
Check that the timer event details are correct.
If you wish to record from AUDIO IN and VIDEO IN
on the front or from either of the EURO SCART
sockets on the back of VCR, press AUX to select for
correct display (AV1, AV2 or AV3).
7. If you want to make another ShowView recording
repeat stages 2 - 7.
Press i twice.
If PLEASE CHECK is displayed, you have entered
incorrect information and will need to re-enter the
data.
Press
Í/I to switch your DVD+VCR power off mode.
will appear in the video recorder’s display while
your VCR waits to make the recording.
To watch a DVD during timer recording standby
mode, press
Í/I and DVD to switch to DVD mode.
8. Press
Í/I to end recording.
OK i
0~9,
SHOWVIEW NO.
- - - - - - -
-
-
REC
OK i
0~9,
SHOWVIEW NO.
24687654
3
REC
DELETE :
PR
DATE
TIME
- -
- -
SP
- -
- -
SP
- -
- -
SP
- -
- -
SP
- -
- -
SP
- -
- -
SP
- - - - - - - -
~
:
:
- - - - - - - -
~
:
:
- - - - - - - -
~
:
:
- - - - - - - -
~
:
:
- - - - - - - -
~
:
:
- - - - - - - -
~
:
:
10
PR-01
12
SP
11 11 55
~
:
:
i
PR
DATE
TIME
- -
- -
SP
- -
- -
SP
- -
- -
SP
- -
- -
SP
- -
- -
SP
- -
- -
SP
- - - - - - - -
~
:
:
- - - - - - - -
~
:
:
- - - - - - - -
~
:
:
- - - - - - - -
~
:
:
- - - - - - - -
~
:
:
- - - - - - - -
~
:
:
10
PR-01
12
SP
11 11
55
~
:
:
i
PR
DATE
TIME
- -
- -
SP
- -
- -
SP
- -
- -
SP
- -
- -
SP
- -
- -
SP
- -
- -
SP
- - - - - - - -
~
:
:
- - - - - - - -
~
:
:
- - - - - - - -
~
:
:
- - - - - - - -
~
:
:
- - - - - - - -
~
:
:
- - - - - - - -
~
:
:
10
PR-01
12
SP
11 11
55
~
:
:
i
VJ9033CP1Z_E-EZ.book Page 22 Friday, March 11, 2005 10:12 AM