JVC LPT1056-001A - Manual (Page 27)

27
Additional Operation - VCR part
OPERA
T
ION
Recording from External Components
You can record from an external component, such as a
camcorder or VCR, connected to any of the DVD+VCR’s
external inputs.
1. Make sure that the component you want to record
from is connected properly to the DVD+VCR.
2. Press AUX repeatedly to select the external input to
record from.
AV 1 for recording from EURO AV1 SCART jacks on
the rear of your unit.
AV 2 for recording from EURO AV2 SCART jacks on
the rear of your unit.
AV 3 for recording from VIDEO IN and AUDIO IN
(Left & Right) jacks on the front of your unit.
3. Load a recordable tape.
4. Set a recording mode (SP or LP) as necessary by
pressing repeatedly.
5. Play the tape or disc in the external component. If
you have a TV attached to your DVD+VCR, you can
see the video playing.
6. Press ¥ once to start recording.
The REC indicator lights in the display window.
7. Press ∫ to stop recording.
Notes:
• Before recording, confirm the recording start position.
• If your source is copy-protected using CopyGuard, you will
not be able to record it using this unit. See Copyright on page
2 for more details.
• To record for a fixed length of time, see One-touch Timer
Recording.
Copying from DVD to VCR
You can copy the contents of a DVD to a VHS tape.
1. Insert the disc you wish to copy into the DVD deck
and close the disc tray.
2. Insert a blank VHS video tape into the VCR deck.
3. Find the place on the DVD from which you want to
start dubbing using the 1, 6, 5 and ;
functions.
For best results, pause playback at the point from
which you want to record.
4. Press ¥ on the Remote Control. The DVD goes into
PLAY mode and the VCR goes into RECORD mode.
If the DVD disc menu appears, you may need to
press
1 manually to begin copying.
5. When the DVD is finished playing, press ∫ to end
copying.
Notes:
• If the DVD you are attempting to copy is copy protected, you
will not be able to copy the disc. It is not permitted to copy
Macrovision encoded DVDs (or Discs). “LOCK” is displayed
in the display window.
• You must stop the copy process manually when the DVD
movie ends, or the unit may replay and record over and over
again.
• When you stop the DVD playback during copying, the
recording on VCR is stopped automatically.
VJ9033CP1Z_E-EZ.book Page 27 Friday, March 11, 2005 10:12 AM