JVC CA-UXG33 - Manual (Page 15)

12
Advanced Radio Operations
Receiving FM Stations with Radio Data
System
Radio Data System allows FM stations to send an additional
signal along with their regular program signals.
This System can receive the following types of Radio Data
System signals.
To show the Radio Data System information
While listening to an FM station...
Searching for a Program by PTY Codes
You can locate a particular kind of program from the preset
channels (see page 8) by specifying the PTY codes.
To search for a program using the PTY codes
1
While listening to an FM station...
2
Select a PTY code.
3
Start searching.
The receiver searches 30 preset FM stations, stops when
it finds the one you have selected, and tunes in to that
station.
• If no program is found, “NOTFOUND” appears on the
display.
• To stop searching any time during search, press
PTY SEARCH.
To continue searching after it stops on an unwanted
station
While the indications on the display are flashing...
PS (Program
Service) Shows commonly known station
names.
PTY (Program
Type) Shows types of broadcast programs.
RT (Radio Text) Shows text messages the station
sends.
Enhanced Other
Networks Provides the information about the
types of the programs broadcast by
the Radio Data System stations of
the different networks.
PS Station names are displayed. “NO PS” will
appear if no signal is sent.
PTY The broadcast program type is displayed.
“NO PTY” will appear if no signal is sent.
RT Text messages the station sends are displayed.
“NO RT” will appear if no signal is sent.
PTY SEARCH
7
DISPLAY
MODE
REPEAT/
TA/News/Info
PRESET/GROUP/ PTY
DOWN,UP
Remote control
Remote
ONLY
DISPLAY
MODE PS PTY RT
Frequency
(Non Radio Data System signal)
Clock
Remote
ONLY
PTY SEARCH
QP Link
S.TURBO
FM ST
QP Link
S.TURBO
FM ST
DOWN
PRESET/GROUP/ PTY
UP
• For details about each PTY code,
see page 13.
PTY SEARCH
QP Link
S.TURBO
FM ST
QP Link
S.TURBO
FM ST
Ex. When “NEWS” is selected
PTY SEARCH
UX-G30[B].book Page 12 Wednesday, December 28, 2005 5:04 PM