JVC CA-NXF7 - Manual (Page 16)

13
Ba
sic ope
rat
io
n
s
■ IMPORTANT
• Slide the remote control mode
selector to [AUDIO].
Examples:
5: [5]
15: [ 10] → [1] → [5]
150: [ 10] → [ 10] → [1] → [5] → [0]
Press [AUDIO F] (or [STANDBY F]
on the main unit).
• The power of the main unit turns on and the
[STANDBY F ] lamp (button) on the main unit
turns off.
• Press [AUDIO F ] (or [STANDBY F ] on the
main unit) again to turn off the power of the main
unit. (The main unit enters the standby mode.)
• With the power off, pressing any of the following
buttons also turns on the main unit.
- [DVD 3], [USB 3], [FM/AM], [AUDIO IN],
[DIGITAL IN], 3 (playback) or 0 on the
remote control
- s3 (playback) or 0 on the main unit
The function assigned to the pressed button
starts working at the same time. (When 3 (play-
back) is pressed, “DVD” is selected as the
source in the display window.)
• An internal cooling fan turns on when the main
unit turns on. This is to prevent overheating of
the main unit. The cooling fan produces noise
during operation. This is not a malfunction.
Press [VOL +] or [VOL –] repeatedly.
• You can also adjust the volume by turning the
[VOLUME] control on the main unit.
Press [MUTING].
• Press [MUTING] again or [VOL +] or [VOL –], or
turn the [VOLUME] control on the main unit to
restore the sound. The sound is also restored
when the main unit is turned off once and turned
on.
1
Press [TREBLE/BASS] repeatedly
to select “TRE” or “BASS” in the
display window.
2
Press [LEVEL +] or [LEVEL –]
repeatedly to adjust the sound
quality.
• Adjustable sound quality is from -10 to +10.
Using the number buttons
Remote control
mode selector
Number
buttons
*
3 (playback)
Turning on/off the main unit
Adjusting the volume
Turning off the sound
temporarily
Adjusting the treble/bass
Basic operations
(Only for NX-F7)
NX-F3_NX-F7[US].book Page 13 Friday, February 15, 2008 4:50 PM