Using the sleep timer, Changing the brightness of the display window, Locking disc ejection – JVC CA-NXF7 User Manual

Page 19

Advertising
background image

Ba

sic ope

rat

io

ns

16

When the time you specify elapses, the main unit
automatically turns off.

Press [SLEEP].

• Each time you press [SLEEP], the time indicated in

the display window changes. You can set the time
to 10, 20, 30, 60, 90, 120, 150 or 180 minutes.

Example: Display when the sleep timer is

set to 60 minutes

Press [SLEEP] repeatedly to select the
time again.

Press [SLEEP] once.

Press [SLEEP] repeatedly until
“SLEEP --” appears.

Turning off the main unit cancels the sleep timer.

■When the main unit is turned on

Press [DIMMER] repeatedly.

• Each time you press [DIMMER], the brightness

changes in 3 levels.

You can lock the disc tray to prevent the disc from
being ejected.

■When the main unit is turned off

Hold down 0 on the main unit for one
or more seconds while holding down
7

on the main unit.

If you attempt to open the disc tray by pressing 0,
the disc tray does not open and “LOCKED”
appears in the display window.

To cancel the disc ejection lock, hold down 0 on
the main unit for one or more seconds while hold-
ing down 7 on the main unit again. “UNLOCKED”
is displayed in the display window.

Using the sleep timer

Changing the remaining time

Confirming the remaining time

Canceling the sleep timer

Changing the brightness of
the display window

Locking disc ejection

Setting the disc ejection lock

For the locations of the remote
control buttons, refer to page 13.

NX-F3_NX-F7[US]-04.fm Page 16 Wednesday, April 2, 2008 4:27 PM

Advertising
This manual is related to the following products: