Samsung FE-N500** - Manual (Page 64)

64_ Maintaining your appliance
4. Push the hinge locks up against the front frame of the oven cavity to the locked position.
5. Close the oven door.
reMoVinG and re-inSTallinG The WarMinG draWer
CAUTION
Turn the power OFF before removing the warming drawer.
How to remove the warming drawer
1. Open the drawer to the fully opened position.
2. Locate the glide lever on each side of the drawer. Push down on the left glide lever and pull up
on the right glide lever.
3. Pull the warming drawer away from the range.
How to re-install the warming drawer
1. Pull the bearing glides to the front of the
chassis glide.
2. Align the glide on each side of the drawer with
the glide slots on the range.
3. Push the drawer into the range until levers
click (approximately 2 inches). Pull the
drawer open again to seat bearing glides into
position. If you do not hear the levers click or
the bearing glides do not feel seated, remove
the drawer and repeat Step 1. This will minimize possible damage to the bearing glides.
Hinge lock
Unlocked position Locked position
Lever
Push down on the left guide
Lever
Pull up on the right guide
Bearing glides