Energy save mode, Microwave power levels, English – Sharp R-963S User Manual

Page 11

Advertising
background image

9

ENERGY SAVE MODE

ENGLISH

MICROWAVE POWER LEVELS

Your oven comes set for the energy save mode.
If you do nothing for 3 minutes after a preceding operation, i.e. closing the door or at the end of cooking,
the power will go off automatically. To restore power on, open the door.
To start energy save mode, follow the instructions below.

Example:
To start the energy save mode, (the current time is 23:35):

NOTE: You can press the CLOCK SETTING key twice at step 2.

To set the microwave power level :
1. Input the time by pressing the TIME keys.
2. Press the MICROWAVE POWER LEVEL key until the desired power level appears on the display. (If the

MICROWAVE POWER LEVEL key is touched once,

will be displayed. If you miss your

desired level, continue pressing the MICROWAVE POWER LEVEL key until you reach the level
again).

3. Press the +1 min

/START key.

NOTE: If the power level is not selected, 900 W is automatically set.

Your oven has 5 power levels. To choose the power
level for cooking, follow the advice given in the
recipe section. Generally the following
recommendations apply:
900 W used for fast cooking or reheating e.g.
soup, casseroles, canned food, hot beverages,
vegetables, fish, etc.
630 W used for longer cooking of dense foods such
as roast joints, meat loaf and plated meals, also for
sensitive dishes such as cheese sauce and sponge
cakes. At this reduced setting, the sauce will not boil
over and food will cook evenly without over cooking
at the sides.

450 W for dense foods which require a long
cooking time when cooked conventionally, eg. beef
dishes, it is advisable to use this power setting to
ensure the meat will be tender.
270 W (Defrost setting) to defrost, select this
power setting, to ensure that the dish defrosts
evenly. This setting is also ideal for simmering rice,
pasta, dumplings and cooking egg custard.
90 W for gentle defrosting, eg. cream gateaux or
pastry.

W = WATT

x1

x1

x1

1. Make sure the

correct time
appears on the
display.

3. Press the 1 MIN

key once and make
sure 0 appears on
the display

2. Press the CLOCK

SETTING key
once.

4. Press +1 min

/START key. The power
will be off and the display
will show nothing.

R-963 English 01/07/2000 11:54 Page 9

Advertising