Sony BDV-E770W - Manual (Page 25)

25 US
Ge
tting Star
te
d
Step 4: Performing the
Easy Setup
Follow the Steps below to make the basic
adjustments for using the system.
Displayed items vary depending on the country
model.
Note
• To use the optional surround back speakers, set
[Surround Back] in [Speaker Settings] to [Yes]
(page 46).
1
Turn on the TV.
2
Connect the calibration mic to the
A.CAL MIC jack on the rear panel.
Set up the calibration mic at ear level using
a tripod, etc. (not supplied). The front of
each speaker should face the calibration
mic, and there should be no obstruction
between the speakers and the calibration
mic.
3
Press [/1 on the unit, and [/1 on the
surround amplifier.
4
Switch the input selector on your TV so
that the signal from the system
appears on the TV screen.
The Easy Setup Display for OSD language
selection appears.
8
0
9 7
5 6 4
2 3 1
C/X/x/c,
HOME
"/1
A. CA L MIC
ECM -AC2
Calibration mic
English
Français
Español
Português
Easy Setup - OSD
Select the language to be displayed by this unit.