Sony SCPH-97042 - Manual (Page 14)

14
Startup with the supplied DVD Player disc
To use all DVD remote control functions, you may need to install the DVD
Player (for PlayStation
®
2) on a memory card (8MB) (for PlayStation
®
2)
(sold separately). For details, refer to the “Notes” section on page 15.
1
Press the MAIN POWER switch on the PlayStation
®
2 console rear
to turn the console on.
The 1 (standby) indicator turns red, and the console is in standby mode.
2
Press the 1/RESET button.
The 1 indicator turns green and the console startup screen is displayed.
3
Press the A (open) button.
The disc tray opens.
4
Place the disc into the disc tray with the label side facing up
(data side down).
5
Press the A button.
The disc tray closes. Once the disc has started, the disc startup screen is
displayed.
Note
The DVD Player (for PlayStation
®
2) is software that allows playback of DVD
videos on the PlayStation
®
2 console.
z Installing the DVD Player on a memory
card (8MB) (for PlayStation
®
2)
The DVD Player can be installed on a memory card (8MB) (for
PlayStation
®
2) (sold separately). If you delete the DVD Player, you can
install it from the supplied disc again at any time.
1
Insert the memory card (8MB) (for PlayStation
®
2) into MEMORY
CARD slot 1 of the PlayStation
®
2 console.