Sharp SCH-R850 - Manual (Page 22)

19
Instead of manually entering the numbers each time, you can
store the numbers in your Contacts along with special characters
called pauses.
• W Pause — A hard pause stops the calling sequence until you press
.
• P Pause — A two-second pause stops the calling sequence for two
seconds and then automatically sends the remaining digits.
To manually call a number with pause(s) without storing it to your
Contacts:
1. With the phone on, press the Dialer soft key. The touch
keypad screen appears in the display.
2. Enter the number you wish to call.
3. Press the Add Pause soft key.
A pop-up menu containing the following options appears in
the display:
• Wait — a hard pause (awaits input from you).
• 2-Sec Pause — a two-second pause.
Tip: You can create pauses longer than two seconds by entering multiple P
Pauses.
4. Select the desired pause option. The respective letter (W or
P) is added to your number entry.
5. Press or the Voice Call soft key to call the number.
Making a Call — Speed Dialing
You can store phone numbers and contact names in your phone’s
Contacts list. Speed Dialing lets you quickly and easily dial any
contact in your Contacts list by using that contact’s Favorites
number in the list. You can assign and change Favorites (speed
dial) numbers for your contacts. (For more information, refer to
“Assigning a Speed Dial Number” on page 40.)
One-Touch Dialing
Speed Dial numbers 002 through 009 are special One-Touch
dialing numbers. You can call the phone numbers stored in your
phone’s Contacts list and assigned Speed Dial numbers 002
through 009 by pressing and holding a single key.
Example: For Speed Dial number 003, press the Dialer soft key, then press
and hold until the name and number appear in the display
and the number is dialed.
Two-Touch Dialing
Memory locations 010 through 030 are special Two-Touch
dialing locations.
Example: For Speed Dial number 013, briefly press , then press and
hold until the name and number appear in the display and
the number is dialed.