Sharp SCH-R850 - Manual (Page 39)

Understanding Your Contacts 36
4. Select the number you wish to store in your Contacts list.
The associated Call Information screen appears in the
display.
5. Press the Add To Contacts soft key. The Add To Contacts
screen appears in the display showing the following
options:
• Add New Contacts — Lets you create a new Contacts entry.
• Update Existing — Lets you add the selected number to an
existing Contacts entry.
For more information on saving the number, see “Saving a
Number from a Call” on page 34.
Finding a Contacts Entry
Voice Method
Use the VoiceSignal Contacts command to view contact
information for any named contact stored in your Contacts list by
saying the name.
Note: The Contacts command shows the requested contact information in
the display but does not dial any phone numbers for the contact.
To look up information for a specific contact:
1. In Standby mode, press the Voice Recognition key
(
).
“Say a Command” appears in the display and is
pronounced through the speaker.
2. Say “Look up”.
VoiceSignal prompts you to “Say the name.”
3. Speak clearly and say the full name of the person you want
to call, exactly as it is entered in your contact list.
If VoiceSignal does not recognize the name you said, a
choice list of up to three names appears in the display, and
VoiceSignal prompts you with “Did you say look up” followed
by the first name on the list.
4. Say “Yes” to confirm the name or “No” to hear the next
name, or use the keypad to select the correct name from
the list. (For more information, refer to “Confirmation” on
page 89.)
• To say the name again, press the Yes soft key in the “Try again?”
screen.
• To exit VoiceSignal without dialing, press .
5. The contact information for the name you selected appears
in the display.
Keypad Methods
Find by Name
If you have stored a named contact in your Contacts list, Find lets
you locate the entry quickly.