Sharp SCH-R850 - Manual (Page 56)

53
• To use pre-composed text, press the Add Quick Text soft key.
5. If desired, repeat steps 3 and 4 for the Text field.
6. To add a video clip to the message, select the Video field.
You are prompted to Take a Video or to add a video clip
from the My Videos folder.
• To activate the phone’s camcorder and record a new video clip,
select Take Video. (For more information, refer to “Camera-
Camcorder” on page 63.) Once you’ve recorded a video clip,
press the Send soft key.
• To access your photo gallery, select My Videos. With video clips in
the gallery, a list of thumbnail images appears in the display. Select
the desired video clip and press the Send soft key.
You are returned to the Video Msg screen which is
populated with the selected video clip in the Video field.
7. Before sending your Video message, you can set message
send options by pressing the More soft key and select
Sending Options. (For more information, refer to “Message
Sending Options” on page 54.)
8. To preview your Video message as the recipient(s) will see
it, press the Preview soft key.
• To make changes to your message, press the Back soft key.
9. To send your finished message, press the Send soft key.
Send Video Messages in Camcorder Mode
Video messages can be sent from your phone’s camcorder to
recipients with compatible phones or devices.
Tip: You can send a Video message to up to ten recipients. Enter each
recipient’s address or phone number in a separate To field of the Video
Msg screen.
1. In Standby mode, press the Camera key ( ). The
camera viewfinder screen appears in the display.
2. Press the Mode soft key. The camcorder viewfinder screen
appears in the display.
3. Press the Recording Mode soft key. Select the Video Msg
option.
Note: For more information about setting camcorder options in your phone,
see “Camcorder Options” on page 73.
4. Using the display as a viewfinder, when the image that you
wish to send appears in the display, press the Camera key
(
) to record a video. The time counter at the bottom
of the Camcorder viewfinder screen indicates recording
time in seconds.
5. To end your video clip, press Stop ( ).