Rear projection, Projection using a mirror, Ceiling-mount projection image projection – Sharp XG-P25X User Manual

Page 33

Advertising
background image

E-30

Setup & Connections

Rear Projection

• Place a translucent screen between the projector and

the audience.

• Use the projector’s menu system to reverse the

projected image. (See page

51

for use of this

function.)

• Optimal image quality can be achieved when the projector

is positioned perpendicular to the screen with all feet flat
and level.

Projection Using a Mirror

• When the distance between the projector and screen

is not sufficient for normal rear projection, you can
use a mirror to reflect the image onto the screen.

• Place a mirror (normal flat type) in front of the lens.
• Project the normal image onto the mirror.
• The image reflected from the mirror is projected onto

the translucent screen.

CAUTION

• When using a mirror, be sure to carefully position both the

projector and the mirror so the light does not shine into the
eyes of the audience.

• It is recommended that you use the optional Sharp

ceiling-mount bracket for this installation.

• Before mounting the projector, contact your nearest

Sharp Authorized LCD Projector Dealer or Service
Center to obtain the recommended ceiling-mount
bracket (sold separately). (AN-XGCM61 ceiling-mount
bracket and its AN-EP101AP extension tube (for
U.S.A.), or AN-NV6T ceiling-mount bracket and its AN-
TK201/AN-TK202 extension tubes (for countries other
than the U.S.A.))

• When the projector is in the inverted position, use the

upper edge of the screen as the base line.

• Use the projector’s menu system to select the

appropriate projection mode. (See page

51

for use

of this function.)

Ceiling-mount Projection

Image Projection

XG-P25X/CD (E)-b

02.3.19, 7:05 PM

30

Advertising