Sharp XG-P25X - Manual (Page 38)

E-35
Operation Buttons
Adjusting the Picture Aspect Ratio
This function allows you to modify or customize the
picture display mode to enhance the input image.
Depending on the input signal, you can choose
NORMAL, FULL, DOT BY DOT, BORDER, STRETCH or
SMART STRETCH image.
1
Press RESIZE. Each time RESIZE is pressed, the
picture mode changes as shown below.
2 To return to the standard image, press UNDO while
“RESIZE” is displayed on the screen.
COMPUTER
Projector Remote control
UNDO
RESIZE
1024 ן 768 – 800 ן 600 SVGA (800 ן 600)
1024 ן 768 – – XGA (1024 ן 768)
1024 ן 768 – 1280 ן 960 SXGA (1280 ן 960)
1024 ן 768 – 1600 ן 1200 UXGA (1600 ן 1200)
960 ן 768 1024 ן 768 1280 ן 1024 SXGA (1280 ן 1024)
• “NORMAL” is fixed when XGA (1024 ן 768) signals are entered.
4:3 aspect ratio
FULL NORMAL DOT BY DOT
Other aspect ratios
Input Signal
Output screen image
NORMAL
Projects a full screen image
while maintaining the
aspect ratio.
FULL
Projects a full screen image
while ignoring the
aspect ratio.
DOT BY DOT
Projects the original
resolution signal of the image.
Resolution lower
than XGA
XGA
Resolution higher
than XGA
SXGA
(1280 ן 1024)
4:3 aspect ratio
4:3 aspect ratio
4:3 aspect ratio
XG-P25X/CD (E)-c 02.3.19, 7:06 PM 35