Samsung MAX-DX76 - Manual (Page 27)

52
Press REVERSE MODE until the appropriate
symbol is displayed.
• : One side of the selected cassette and then stops.
• : One side of the cassette.
The other side of the cassette and then stops.
• : Both sides of the cassette indefinitely until you
press stop.
REPEAT A ↔ B Function
• Use this to a specific section again during playback.
• Set the start and end points of the section you want to
repeat 3 times.
• This is a useful when learning a foreign language.
• The TAPE REPEAT function can be used only on
sections that are longer than 7 seconds.
T
APE DECK
Your mini component system has three cassette playback modes which
enable you to listen to both sides of a cassette automatically. .
Selecting the Cassette Playback Mode
51
Listening to a Cassette
Always treat your cassettes with care; refer, if necessary, to the section entitled
“Precautions When Using Audio Cassettes” on page 64.
• Insert a cassette with the
recording/playback side facing
the cassette holder, and then
push the cassette door shut.
2 1 3 Press TAPE on
the player to
select the Tape
function.
Switch the system
on by pressing
STANDBY ON .
• Rewind the cassette / DOWN
button.
• Fast-forward the cassette UP /
button.
5 4
• Side A : Tape ( ) button once.
• Side B : Tape ( ) button twice
Press the PUSH
OPEN ( ) of the
cassette deck to open
the cassette door and
insert a cassette.
Press the ,
button if necessary. 6 When you have
finished playback,
press
STOP button.
Press the
button. The cassette
starts playing.
• You cannot set the end point(B) within 7 seconds after setting the start
point(A).
• Repeat A-B Function is available for TAPE only.
36P~76P(DX75/76)-NO GB 2007.4.23 10:36 AM Page 42