Sony SMP-NX20 - Manual (Page 13)

13
H
ook
up
s and
S
e
tti
n
gs
Connecting to the
Network
Use a LAN cable to connect to the LAN (100)
terminal on the player.
z
Using a shielded interface cable (LAN cable) is
recommended.
Use the wireless LAN that is built into the
player.
z
Use a wireless LAN router supporting 802.11b/g or
802.11b/g/n.
Before setting the network settings
When your wireless LAN router (access
point) is Wi-Fi Protected Setup (WPS)-
compatible, you can easily set the network
settings with the WPS button.
If not, check the following information in
advance, and record it in the space provided
below.
• The network name (SSID
*1
) that identifies
your network
*2
.
______________________
• If security is set on your wireless network,
the security key (WEP key, WPA key)
*2
.
______________________
*1
SSID (Service Set Identifier) is a name that
identifies a particular wireless network.
*2
You need to check the setting of your wireless
LAN router to get the information about SSID
and security key. For details:
– visit the following website:
http://esupport.sony.com/
– refer to the instruction manual supplied with
the wireless LAN router
– consult the manufacturer of the wireless LAN
router
Wired Setup
Wireless Setup
ADSL modem/
Cable modem Broadband
router
LAN cable
(not supplied)
Internet
Wireless LAN
router ADSL modem/
Cable modem
LAN cable (not supplied)
Internet