Maintenance – Sony HVL-F36AM User Manual

Page 40

Advertising
background image

40

Temperature

• The flash unit may be used over a temperature range of 0 °C to 40 °C.
• Do not expose the flash unit to extremely high temperatures (e.g. in

direct sunlight inside a vehicle) or high humidity.

• To prevent condensation forming on the flash, place it in a sealed plastic

bag when bringing it from a cold environment into a warm
environment. Allow it to reach room temperature before removing it
from the bag.

• Battery capacity decreases at colder temperatures. Keep your camera

and spare batteries in a warm inside pocket when shooting in cold
weather.

may come on even when there is some power left in the

batteries in cold weather. Batteries will regain some of their capacity
when warmed to normal operating temperature.

• This flash unit is not waterproof. Be careful not to bring it into contact

with water or sand when using it at the seashore, for example. Contact
with water, sand, dust, or salt may result in a malfunction.

Maintenance

Remove this unit from the camera. Clean the flash with a dry soft cloth. If
the flash has been in contact with sand, wiping will damage the surface,
and it should therefore be cleaned gently using a blower. In the event of
stubborn stains, use a cloth lightly dampened with a mild detergent
solution, and then wipe the unit clean with a dry soft cloth. Never use
strong solvents, such as thinner or benzine, as these damage the surface
finish.

Advertising