Display, Using the cd display, Troubleshooting – Sony CMT-EP404 User Manual

Page 19: Problems and remedies, General

Advertising
background image

Display/Troubleshooting

19

GB

Display

Using the CD display

Press DISPLAY repeatedly.

The display changes as follows:

During normal play

Elapsed playing time on the current track

t

Remaining time on the current track

t

Remaining time on the current CD

t Clock

display (for five seconds)

t Elapsed playing

time on the current track

t ...

In the stop mode

Total number of tracks and total playing time
t Clock display (for five seconds) t Total
number of tracks and total playing time

t ...

Troubleshooting

Problems and remedies

If you have any problem using this system, use
the following check list.

First, check that the power cord is connected
firmly and the speakers are connected correctly
and firmly.

Should any problem persist, consult your
nearest Sony dealer.

General

The display or button remains lighted or flashes
even after the system was turned off.

• Press DISPLAY on the remote repeatedly until

the clock display appears.

The clock indication does not show the correct
time.

• A power interruption occurred. Set the clock and

timer settings again.

The clock setting/radio presetting/timer is
canceled.

• The power cord is disconnected or a power

failure occurs longer than half a day.
Redo the following:

— “Setting the clock” on page 7

— “Presetting radio stations” on page 10

If you have set the timer, also redo “Timer-
recoding radio programs” on page 16 and
“Waking up to music” on page 18.

There is no sound.

• Turn VOLUME clockwise and hold.

• The headphones are connected.

• Insert only the stripped portion of the speaker

cord into the SPEAKER terminal. Inserting the
vinyl portion of the speaker cord will obstruct the
speaker connections.

There is severe hum or noise.

• A TV or VCR is placed too close to the stereo

system. Move the stereo system away from the
TV or VCR.

The timer does not function.

• Set the clock correctly.

• You cannot activate the Timer-recording and

Daily Timer at the same time.

• When you used the Sleep Timer, Daily Timer

and Timer-recording will not turn on the system
until the Sleep Timer turns it off.

continued

Advertising
This manual is related to the following products: