Setting the clock – Sony CMT-EP404 User Manual

Page 7

Advertising
background image

Getting Started

7

GB

Setting the clock

1

Turn on the system.

2

Press CLOCK/TIMER SET on the
remote.

3

Press

.

or

>

on the remote

repeatedly to set the hour.

4

Press ENTER.

5

Press

.

or

>

on the remote

repeatedly to set the minute.

6

Press ENTER.

The clock starts working.

To adjust the clock

1

Press CLOCK/TIMER SET on the remote.

2

Press . or > on the remote to select
“SET CLK”, then press ENTER.

3

Do the same procedures as step 3 to 6 above.

Note

The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.

E

e

e

E

Jack type

B

3

Connect the power cord to a wall outlet.

If the supplied adaptor on the plug does not
fit your wall outlet, detach it from the plug
(only for models equipped with the
adaptor).

To turn on the system, press [/ 1 (power).

Inserting two size AA (R6)
batteries into the remote

Tip

When the remote no longer operates the system,
replace both batteries with new ones.

Note

If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage.

AM loop antenna

Extend the FM lead
antenna horizontally.

FM ANT

75

CO

AXIAL

AM ANT

Advertising
This manual is related to the following products: