Sony SLV-AX10 - Manual (Page 21)

Getti
ng Sta
rted
21 Hookups
You have now completed hookup. If you want to use the VCR Plus+ system for
recording, go to page 37 (SLV-N60/AX20 only).
Automatic clock setting
Once you’ve set up the VCR, it automatically sets the clock the first time you turn off
the VCR. “ACS” (Auto Clock Set) will flash in the display window and search for a
time signal provided by some TV channels. After that, whenever you turn off the
VCR, it checks the time and adjusts the clock, even for Daylight Saving Time.
If you want to use the timer to record right away, or if the channels in your area do not
carry time signals, set the clock manually. For details, see page 28.
Notes
• To use the Auto Clock Set feature, set the A/B switch to “A.”
• If the clock is not set, “ACS” will flash in the display window whenever the VCR is turned
off. During this time, the VCR will search for a time signal.
4 The AUTO PRESET starts.
4 Preset the cable box output channel (usually 2, 3 or 4). For details, see page 33.
1 Press MENU, then select SETTINGS and press OK.
2 Select TUNER PRESET and press OK.
3 Enter the cable box output channel.
4 Set MANUAL SET to ADD and press OK.
5 Press MENU to exit the menu.
SET UP
SET UP IS DONE
PLEASE WAIT
SET UP
TUNER PRESET
AUTO PRESET
PROCESSING
CH 2 4
Normal display
SETTINGS
TUNER PRESET
SET VCR Plus+ CHANNELS
CLOCK SET
LANGUAGE
RETURN
SET :
SELECT :
OK
MENU
QUIT :
TUNER PRESET
CABLE
ADD
ERASE
ANTENNA / CABLE
AUTO PRESET
MANUAL SET
AFT
FINE TUNING
RETURN
SET :
SELECT :
OK
MENU
QUIT :
CH 3
Cable box output channel