Sony SLV-AX10 - Manual (Page 54)

54 Recording TV programs using the VCR Plus+ system (SLV-N60/AX20 only)
To use the VCR after setting the timer
To use the VCR before timer recording begins, just press ?/1. The indicator
disappears from the display window and the VCR switches on. Remember to press
?/1 to reset the VCR to the timer recording standby mode after using the VCR.
You can also do the following tasks while the VCR is recording:
• Reset the counter (page 43).
• Display tape information on the TV screen (page 45).
• Check the timer settings (page 61).
• Watch another TV program (page 46).
To lock the VCR after setting the timer (Child Lock)
When the VCR is turned on, hold down ?/1 POWER on the VCR until the -
indicator appears in the display window. The VCR turns off and the - indicator
remains lit. The VCR will not work except for timer recordings.
To unlock the VCR, hold down ?/1 POWER on the VCR until the - indicator
disappears from the display window. The VCR is unlocked and turns on.
To stop timer recording while the VCR is locked, press x STOP. The recording
stops and the VCR is unlocked.
Tips
• To check, change or cancel the program setting, see “Checking/changing/canceling timer
settings” (page 61).
• When you are recording a program in the SP mode and the remaining tape becomes shorter
than the recording time, the tape speed is automatically changed to the EP mode. Note that
some noise will appear on the picture when the tape speed is changed. If you want to keep
the tape speed, set AUTO TAPE SPEED to OFF in the ADVANCED OPTIONS menu (page
68).
Notes
• If the VCR does not accept the PlusCode number, this means that:
– The PlusCode number is incorrect.
– ONCE, DAILY, or WEEKLY was selected incorrectly. You cannot select DAILY or
WEEKLY for a program that airs more than seven days ahead.
• The VCR will be unlocked when:
– You stop timer recording by pressing x STOP.
– You insert a tape.
– The AC power cord is disconnected or power supply stops.