Sony PCG-R505TS - Manual (Page 83)

Connecting a Universal Serial Bus (USB) Device
83
Using the Docking Station
1 Locate a USB connector on the optional docking station. There are two
USB connectors located on the back side of the docking station.
2 Plug one end of the USB cable into a connector and the other end into the
USB device.
You can use an optional Sony USB mouse PCGA-UMS1 series (not supplied)
with this computer. Since the USB mouse software driver is preinstalled in the
computer, you simply plug the USB mouse into the USB connector to use it. One
USB connector supports one USB device.
Connecting USB Device
✍
See the manual that came with your USB device for more information on its
installation and use.
To
USB mouse
USB