Specifications, Before requesting service – Samsung SVR-24JP User Manual

Page 23

Advertising
background image

44

MAINTEN-

ANCE

43

SPECIFICATIONS

Recording Type

Rotation head azimuth recording type, luminance signal FM recording type,
color signal down converted direct recording type

Signal Type

PAL type

Tape Speed

23.39 mm/sec (L3H mode; E-180)

Applicable Video Tape

type video tape

Recording Time

L3H/L8H/L12H/L24H/000H : SVR-24JP
L3H/L8H/L12H/L24H/36H/48H/72H/120H/168H/240H/480H/
960H/000H : SVR-960JP

Rewinding Time

Approximately 100 seconds (E-180 tape, In case of rewind time)

Image Input, output

1.0 Vp-p (unbalanced) 75 ohm

Image S/N

Above 42dB (L3H recording)

Sound Input

-8dB (L3H mode)

Sound Output

-8dB (L3H mode)

Sound S/N

Above 40 dB (L3H recording)

Characteristics of

100-5,000Hz (L3H recording)

Sound Frequency

Rated Voltage

AC100~240V

Rated Frequency

50~60Hz

Power Consumption

16W

Ambient Temperature

5˚C ~ 40˚C (41˚F ~ 104˚F)

Installation Conditions

Operating position-Horizontal
Relative humidity: Below 80%

Dimensions

430mm(W) x 97mm (H) x 294mm (D)

Weight

4 Kg

Accessories

User's manual

BEFORE REQUESTING SERVICE

1

Careless handling by the user is not covered.

Strong impacts.
Video head damage due to improper cleaning.
Foreign substances entering the unit.
Unauthorized internal modification by the user.
Use in high or low temperature, high humidity, or smoky areas.
Operation other than described in the instructions.
Use of power sources other than specified for the unit.

2

Operating Time Counter
Note that it displays a maximum time of 9999.
Refer to Alarm Function for proper operation.

The table of Cleaning Lubrication and replacement time

about principal parts

• This table is for normal temperature and humidity. It is necessary to check more frequently under

extreme conditions.

• The life of the cylinder assembly depends on the operation conditions.
• If you have any questions. Please contact an authorized technician.

: Cleaning

: Check & replacement as necessary

: Add Oil

: Change

*Remark

– The clean the parts, use patch and alcohol(solvent).
– After cleaning, use the video tape after alcohol has dired completely.
– We recommend to use oil [EP-56] or solvent.
– One or two drops of oil should be applied after cleaning with alcohol.
– Apply oil periodically (Apply oil after cleaning)
– Applying oil excessively may cause malfunction.

500

1000

2000

3000

4000

5000

6000

8000

10000

TAPE GUIDE POSTS

CYLINDER ASSY

PINCH ROLLER

CAPSTAN MOTOR

BELT PULLEY

SOLENOID BRAKE UNIT

01671A SVR-24JP/960JP-E3 12/7/01 4:06 PM Page 44

Advertising
This manual is related to the following products: