Samsung FX 505 - Manual (Page 29)

Controlling Transmission Quality continued
To send a fax in FINE resolution, load the
document and press [FINE/SUPER]
repeatedly before dialing until the
indicator on the key lights to confirm that
the FINE mode is active.
To send a fax in SUPER FINE resolution,
load the document and press
[ F I N E / S U P E R ] repeatedly until the
indicator flickers.
To increase the contrast for L I G H T
documents, load the document and press
[LIGHT/PHOTO] repeatedly until the
indicator on the key lights.
To send PHOTO p r e s s
[LIGHT/PHOTO] repeatedly until the
indicator flickers.
Y O U can use [FINE/SUPERI key and
[LIGHT/PHOTO] key at the same time
to adjust the resolution and the contrast
of your documents. LCD window displays
the selected modes as shown below :
To find out which resolution and contrast
settings are best for a document, use
your unit to make a copy with whatever
settings you like. The copy will show you
how your document would appear at the
receiving fax machine if you send it with
the current resolution and contrast
settings.
l The PHOTO mode and the SUPER FINE
resolution mode can not be set at the
same time. If you select the modes to
b e a c t i v a t e d , t h e w i n d o w d i s p l a y s
[ P H O T O / S U P E R ] , but the unit will
actually send or copy the document in
the PHOTO mode, and the FINE mode
instead of SUPER FINE mode.
l When you select PHOTO mode, the unit
will actually send or copy the document in
FINE resolution.
l When you are copying, if you do not
select any resolution mode, the unit will
be automatically set to be the FINE
mode and copy the document in the
FINE resolution.
Making Copies
Your fax unit doubles as a handy copy
machine.
1. Load the document face down into the
unit (see page 22).
2. Adjust the resolution and/or the
contrast o f d o c u m e n t b y u s i n g
[FINE/SUPER] or [LIGHT/PHOTO],
if necessary.
3. Press [START/COPY].
If you copy two or more pages, be sure
the bottom sheet enters first.