Speed dial numbers, Storing numbers for one-touch dialing – Samsung FX 505 User Manual

Page 30

Advertising
background image

S t o r i n g O n e - T o u c h & S p e e d D i a l N u m b e r s

Instead

of

manually

dialing

numbers, you can use either one-

touch keys or 2-digit speed dial

numbers

to quickly dial the

numbers that have been stored in

your unit’s memory. You can store

up to 40 telephone numbers of up

to 34 digits each and the

corresponding destination names
of up to 20 digits each, using 10
one-touch keys and 20 speed dial

numbers. Storing name is optional.

Storing Numbers for

One-Touch Dialing

Y o u c a n s t o r e u p t o 2 0 t e l e p h o n e

numbers into 10 one-touch keys on your
unit. Because each one-touch key can
contain both a fax number and a
telephone number. The storing procedure
is slightly different for telephone vs. fax
numbers.

T o b e g i n s t o r i n g n u m b e r s , p r e s s

[FUNCTION]. Follow the steps at right.

To Verify Your Stored Numbers

Print the location number list to

verify your one-touch telephone

and fax number entries and speed
dial telephone number entries (see
page 39).

Window Message

Your Response

Press one-touch key under which you want to assign the
number.

To store a telephone number, press [YES].
or,
To store a facsimile number, press [NO]. The unit displays

[XY:FAX ? (Y/N)], where [XY] is the one-touch key

number (01-10) selected. Press [YES].

If the window then says [CANCEL ? (Y/N)], a number is already
assigned to the one-touch key. Press [YES] to replace that

number and continue, or [NO] to start over with a different one-
touch key.

Enter the fax number or the telephone number you want to

store. You can use any key on the dial keypad, including

[*] and

[ # ] .

Pressing [REDIAL/PAUSE] between numbers adds a 2-
second pause each time it is pressed. Hyphen symbol
appears on the window at the pause entry.

If you make a mistake while entering a number, press

[NO] to backspace and correct.

When the correct number appears on the window, press

[YES].

If you want to identify the number with a destination name,

enter the desired name as described in “How to Enter

Name” on page 15.

When the desired name appears on the window, press

[YES].

or,

If you do not want to enter a name, just press [ Y E S ]

without entering name.

To use the memory search function, it is recommended to enter

name.

To store other numbers, repeat the steps from beginning.

Advertising