Samsung FX 505 - Manual (Page 38)

Setting User Options
The option settings for your
machine are preset at our factory
and might not need to be
changed. If you do need to
change the settings, first print out
the options list to see the current
option settings (see page 40).
To return the unit to the standby mode in
the middle of setting user options, press
[STOP].
To set or change options, press
[FUNCTION] and then press. [4].
Press [YES]. Follow the steps at right.
The (Y) or (N) indicates how each option
is currently set.
Window Message Your Response
Press [YES] if you want to set your fax
machine to have your terminal ID (TTI)
printed on each page you send.
Press [NO] not to have your TTI printed.
Your unit is preset to [YES] at factory.
Press [YES] if you want to set your fax
machine to automatically print out a
confirmation
report after each
transmission.
Press [NO] if you do not want this report
to be automatically printed.
Your unit is preset to [NO] at factory.
Enter the number of rings (1 through 7)
your unit should wait before it answers an
incoming call in AUTO-RCV mode. Then,
press [YES].
l l If you enter [1], the unit will answer
calls on the first ring.
l l To give you time to answer normal calls
when you are home, set this option for
at least four rings.
l l Your unit is preset to [2] at factory.