Cleaning components – Samsung FX 505 User Manual

Page 46

Advertising
background image

M a i n t e n a n c e a n d T r o u b l e s h o o t i n g

c o n t i n u e d

Cleaning Components

When the copied documents are hard to
read, clean the machine’s scanning glass
and white roller. If they are dirty, the
quality of the transmission image and

copy becomes degraded.

If you have document jams in automatic

feeding, it is recommended to clean the
ADF rubber surface as follows.

1. Lift the control panel using hand.

2. Disassemble the white roller as

follows.

Both ends of the roller are terminated

with bushings which are snapped shut
with small tabs. Push the tabs slightly

inwards in the direction of ‘A’, then
rotate it in the direction of ‘B’ until it
reaches the slot as shown in the figure
below. Then pull the roller upwards in

the direction of ‘C’.

Be careful not to lose the bushing on one
end of the roller when disassembling.

3. Wipe the roller clean with a soft cloth

dampened with alcohol. Then, dry
thoroughly.

Do not use the document having contents

written by pencil on the back side. It
cause the white roller to be stain. When

the roller becomes dirty, the copied
document will not reproduced clear.

Advertising